English Safety Data Sheet Database 中文版 MSDS

Terephthaloyl chloride

CAS No. 100-20-9 | PubChem CID 7488
Section 1. Identification
Chemical NameTerephthaloyl chloride CAS No.100-20-9
Synonyms1,4-benzenedicar-bonylchloride; terephthaloylchloride Chinese Name对苯二甲酰氯
Molecular FormulaC8H4Cl2O2 Molecular Weight203.02
UN No.2923 Data SourcePubChem (NIH/NLM)
GHS Hazard Classification
Signal Word DANGER
Pictograms GHS05 · Corrosive GHS06 · Acute Toxic GHS08 · Health Hazard
Hazard Statements H314H331H318H371
Precautionary Statements P260P261P264P271P280P301+P330+P331P302+P361+P354P304+P340P305+P354+P338P316P321P363P403+P233P405P501P264+P265P270P308+P316P317

Section 2. Hazards Identification

This chemical does not meet GHS hazard criteria for 88.7% (2008 of 2263) of all reports.

H314 (11.2%): Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]

H331 (11.1%): Toxic if inhaled [Danger Acute toxicity, inhalation]

P260, P261, P264, P271, P280, P301+P330+P331, P302+P361+P354, P304+P340, P305+P354+P338, P316, P321, P363, P403+P233, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 2263 reports by companies from 9 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Reported as not meeting GHS hazard criteria per 2008 of 2263 reports by companies.

There are 8 notifications provided by 255 of 2263 reports by companies with hazard statement code(s).

Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website.

H314: Causes severe skin burns and eye damage [Danger Skin corrosion/irritation]

H318: Causes serious eye damage [Danger Serious eye damage/eye irritation]

H371: May cause damage to organs [Warning Specific target organ toxicity, single exposure]

P260, P264, P264+P265, P270, P280, P301+P330+P331, P302+P361+P354, P304+P340, P305+P354+P338, P308+P316, P316, P317, P321, P363, P405, and P501 (click each P-code to see the statement)

Section 4. First-Aid Measures

Fresh air, rest. Half-upright position. Refer for medical attention.

Remove contaminated clothes. Rinse skin with plenty of water or shower. Refer for medical attention .

First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.

Rinse mouth. Give one or two glasses of water to drink. Do NOT induce vomiting. Refer for medical attention .

Section 5. Fire-Fighting Measures

Use dry sand, powder, carbon dioxide. NO hydrous agents.

Section 6. Accidental Release Measures

Personal protection: chemical protection suit and particulate filter respirator adapted to the airborne concentration of the substance. Sweep spilled substance into covered plastic containers. Carefully collect remainder. Then store and dispose of according to local regulations.

Section 7. Handling and Storage

Separated from strong oxidants. Dry. Well closed. Do NOT store or transport in containers made from metal.

Section 8. Exposure Controls / Personal Protection

0.47 [mg/m3]

5.1 [mg/m3]

31 [mg/m3]

A harmful concentration of airborne particles can be reached quickly when dispersed.

The substance is corrosive to the eyes, skin and respiratory tract. Corrosive on ingestion. Exposure could cause asphyxiation due to swelling in the throat. Inhalation may cause lung oedema.

NO open flames. Closed system, dust explosion-proof electrical equipment and lighting. Prevent deposition of dust.

PREVENT DISPERSION OF DUST!

Use local exhaust or breathing protection.

Protective clothing. Protective gloves.

Wear safety goggles or eye protection in combination with breathing protection.

Do not eat, drink, or smoke during work.

Section 9. Physical and Chemical Properties

Large Crystals; Dry Powder

Colorless or white solid with pungent odor; [ICSC] White flakes; [MSDSonline]

WHITE POWDER OR COLOURLESS NEEDLES WITH PUNGENT ODOUR.

COLORLESS NEEDLES

266 °C @760 [mm Hg]

82-84 °C

79.5-84 °C

SOLUBLE IN ETHER

Solubility in water: reaction

1.32 g/cm³

Vapor pressure, Pa at 20 °C: 320

0.88 (calculated)

DECOMPOSES IN WATER AND ALCOHOL

Boiling point

Chemical shift

Heat of sublimation

Lineshape

Nuclear quadrupole resonance spectroscopy

Quadrupole coupling

Vapor pressure

Toxic Gases & Vapors -> Acid Halides

FCS -> FDA Cumulative Estimated Daily Intake (CEDI)

FCS -> FDA Inventory of Food Contact Substances Listed in 21 CFR

FCS -> FDA Inventory of Effective Food Contact Substance (FCS) Notifications

Section 11. Toxicological Information

Serious by all routes of exposure.

Cough. Sore throat. Burning sensation. Laboured breathing. Shortness of breath. Symptoms may be delayed.

Redness. Pain. Skin burns.

Redness. Pain. Blurred vision. Severe deep burns.

Abdominal pain. Nausea. Vomiting. Diarrhoea. Shock or collapse.

Dermatotoxin - Skin burns.

Lacrimator (Lachrymator) - A substance that irritates the eyes and induces the flow of tears.

Toxic Pneumonitis - Inflammation of the lungs induced by inhalation of metal fumes or toxic gases and vapors.

LC50 (rat) = 700 mg/m3/4h

Source: PubChem CID 7488 (NIH/NLM, public domain). Retrieved from PubChem, a public-domain chemistry database maintained by the U.S. National Library of Medicine. Last updated: 2026-08-02 08:56:22.
Disclaimer: This information is compiled for reference only and does not replace the manufacturer's official Safety Data Sheet. Always consult the supplier's SDS before handling any chemical.