English Safety Data Sheet Database 中文版 MSDS

7-Methylquinoline

CAS No. 612-60-2 | PubChem CID 11927
Section 1. Identification
Chemical Name7-Methylquinoline CAS No.612-60-2
Synonymsm-toluquinoline; 7-methyl quinoline Chinese Name7-甲基喹啉
Molecular FormulaC10HgN Molecular Weight143.1852
UN No. Data SourcePubChem (NIH/NLM)
GHS Hazard Classification
Signal Word DANGER
Pictograms GHS05 · Corrosive GHS07 · Irritant
Hazard Statements H315H318H319H335
Precautionary Statements P261P264P264+P265P271P280P302+P352P304+P340P305+P351+P338P305+P354+P338P317P319P321P332+P317P337+P317P362+P364P403+P233P405P501

Section 2. Hazards Identification

H315 (100%): Causes skin irritation [Warning Skin corrosion/irritation]

H318 (88.9%): Causes serious eye damage [Danger Serious eye damage/eye irritation]

H319 (11.1%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]

H335 (97.8%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]

P261, P264, P264+P265, P271, P280, P302+P352, P304+P340, P305+P351+P338, P305+P354+P338, P317, P319, P321, P332+P317, P337+P317, P362+P364, P403+P233, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 45 reports by companies from 5 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website.

Section 4. First-Aid Measures

EYES: First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center. Do not put any ointments, oils, or medication in the victim's eyes without specific instructions from a physician. IMMEDIATELY transport the victim after flushing eyes to a hospital even if no symptoms (such as redness or irritation) develop.

SKIN: IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water. If symptoms such as redness or irritation develop, IMMEDIATELY call a physician and be prepared to transport the victim to a hospital for treatment.

INHALATION: IMMEDIATELY leave the contaminated area; take deep breaths of fresh air. If symptoms (such as wheezing, coughing, shortness of breath, or burning in the mouth, throat, or chest) develop, call a physician and be prepared to transport the victim to a hospital. Provide proper respiratory protection to rescuers entering an unknown atmosphere. Whenever possible, Self-Contained Breathing Apparatus (SCBA) should be used; if not available, use a level of protection greater than or equal to that advised under Protective Clothing.

INGESTION: DO NOT INDUCE VOMITING. If the victim is conscious and not convulsing, give 1 or 2 glasses of water to dilute the chemical and IMMEDIATELY call a hospital or poison control center. Be prepared to transport the victim to a hospital if advised by a physician. If the victim is convulsing or unconscious, do not give anything by mouth, ensure that the victim's airway is open and lay the victim on his/her side with the head lower than the body. DO NOT INDUCE VOMITING. IMMEDIATELY transport the victim to a hospital. (NTP, 1992)

Section 5. Fire-Fighting Measures

Fires involving this material can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)

Section 6. Accidental Release Measures

Excerpt from ERG Guide 154 [Substances - Toxic and/or Corrosive (Non-Combustible)]:

IMMEDIATE PRECAUTIONARY MEASURE: Isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids.

SPILL: Increase the immediate precautionary measure distance, in the downwind direction, as necessary.

FIRE: If tank, rail tank car or highway tank is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2024)

Section 7. Handling and Storage

SMALL SPILLS AND LEAKAGE: If you spill this chemical, FIRST REMOVE ALL SOURCES OF IGNITION. Then, use absorbent paper to pick up all liquid spill material. Your contaminated clothing and absorbent paper should be sealed in a vapor-tight plastic bag for eventual disposal. Solvent wash all contaminated surfaces with 60-70% ethanol followed by washing with a soap and water solution. Do not reenter the contaminated area until the Safety Officer (or other responsible person) has verified that the area has been properly cleaned.

STORAGE PRECAUTIONS: You should protect this material from exposure to light, and store it in a refrigerator. STORE AWAY FROM SOURCES OF IGNITION. (NTP, 1992)

Section 8. Exposure Controls / Personal Protection

RECOMMENDED RESPIRATOR: Where the neat test chemical is weighed and diluted, wear a NIOSH-approved half face respirator equipped with an organic vapor/acid gas cartridge (specific for organic vapors, HCl, acid gas and SO2) with a dust/mist filter. (NTP, 1992)

Section 9. Physical and Chemical Properties

7-methylquinoline appears as clear yellow liquid or oil. (NTP, 1992)

Clear yellow liquid; mp = 35-38 deg C; [CAMEO] Viscous liquid; [Alfa Aesar MSDS]

484.7 to 486.5 °F at 760 mmHg (NTP, 1992)

95 to 100 °F (NTP, 1992)

230 °F (NTP, 1992)

less than 1 mg/mL at 68 °F (NTP, 1992)

1.0609 at 68 °F (NTP, 1992) - Denser than water; will sink

Boiling point

Chemical diffusion

Diamagnetic susceptibility

Diffusion

Diffusive flux

Heat of sublimation

Magnetic susceptibility

Optical coefficient

Refractive index

Vapor pressure

Nitrogen Compounds -> Quinolines

Section 10. Stability and Reactivity

Insoluble in water.

Amides and Imides

Hydrocarbons, Aromatic

Acids, Weak

7-METHYLQUINOLINE may be sensitive to exposure to light. May react vigorously with strong oxidizing agents and strong acids (NTP, 1992). Neutralizes acids in exothermic reactions to form salts plus water. May be incompatible with isocyanates, halogenated organics, peroxides, phenols (acidic), epoxides, anhydrides, and acid halides. Flammable gaseous hydrogen may be generated in combination with strong reducing agents, such as hydrides.

Section 14. Transport Information

Corrosive

Source: PubChem CID 11927 (NIH/NLM, public domain). Retrieved from PubChem, a public-domain chemistry database maintained by the U.S. National Library of Medicine. Last updated: 2026-08-02 09:45:18.
Disclaimer: This information is compiled for reference only and does not replace the manufacturer's official Safety Data Sheet. Always consult the supplier's SDS before handling any chemical.