English Safety Data Sheet Database 中文版 MSDS

Pentyl formate

CAS No. 638-49-3 | PubChem CID 12529
Section 1. Identification
Chemical NamePentyl formate CAS No.638-49-3
Synonymsn-pentylformate; n-amylformate Chinese Name甲酸正戊酯
Molecular FormulaC6H12O2 Molecular Weight116.16
UN No.1109 Data SourcePubChem (NIH/NLM)
GHS Hazard Classification
Signal Word DANGER
Pictograms GHS02 · Flammable GHS07 · Irritant
Hazard Statements H226H319H335H225
Precautionary Statements P210P233P240P241P242P243P261P264+P265P271P280P303+P361+P353P304+P340P305+P351+P338P319P337+P317P370+P378P403+P233P403+P235P405P501

Section 2. Hazards Identification

H226: Flammable liquid and vapor [Warning Flammable liquids]

H319: Causes serious eye irritation [Warning Serious eye damage/eye irritation]

H335: May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]

P210, P233, P240, P241, P242, P243, P261, P264+P265, P271, P280, P303+P361+P353, P304+P340, P305+P351+P338, P319, P337+P317, P370+P378, P403+P233, P403+P235, P405, and P501 (click each P-code to see the statement)

H225 (15.6%): Highly Flammable liquid and vapor [Danger Flammable liquids]

H226 (84.4%): Flammable liquid and vapor [Warning Flammable liquids]

H319 (100%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]

H335 (100%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]

Aggregated GHS information provided per 1668 reports by companies from 17 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website.

P210, P233, P240, P241, P242, P243, P280, P303+P361+P353, P370+P378, P403+P235, and P501 (click each P-code to see the statement)

Section 4. First-Aid Measures

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]:

Refer to the "General First Aid" section. Specific First Aid: Wash skin with soap and water. In case of burns, immediately cool affected skin for as long as possible with cold water. Do not remove clothing if adhering to skin. (ERG, 2024)

Section 5. Fire-Fighting Measures

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]:

CAUTION: The majority of these products have a very low flash point. Use of water spray when fighting fire may be inefficient.

SMALL FIRE: Dry chemical, CO2, water spray or alcohol-resistant foam. Do not use dry chemical extinguishers to control fires involving nitromethane (UN1261) or nitroethane (UN2842).

LARGE FIRE: Water spray, fog or alcohol-resistant foam. Avoid aiming straight or solid streams directly onto the product. If it can be done safely, move undamaged containers away from the area around the fire.

FIRE INVOLVING TANKS, RAIL TANK CARS OR HIGHWAY TANKS: Fight fire from maximum distance or use unmanned master stream devices or monitor nozzles. Cool containers with flooding quantities of water until well after fire is out. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks in direct contact with flames. For massive fire, use unmanned master stream devices or monitor nozzles; if this is impossible, withdraw from area and let fire burn. (ERG, 2024)

Section 6. Accidental Release Measures

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]:

IMMEDIATE PRECAUTIONARY MEASURE: Isolate spill or leak area for at least 50 meters (150 feet) in all directions.

LARGE SPILL: Consider initial downwind evacuation for at least 300 meters (1000 feet).

FIRE: If tank, rail tank car or highway tank is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. (ERG, 2024)

Section 7. Handling and Storage

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]:

ELIMINATE all ignition sources (no smoking, flares, sparks or flames) from immediate area. All equipment used when handling the product must be grounded. Do not touch or walk through spilled material. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. A vapor-suppressing foam may be used to reduce vapors. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers. Use clean, non-sparking tools to collect absorbed material.

LARGE SPILL: Dike far ahead of liquid spill for later disposal. Water spray may reduce vapor, but may not prevent ignition in closed spaces. (ERG, 2024)

Section 8. Exposure Controls / Personal Protection

Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]:

Wear positive pressure self-contained breathing apparatus (SCBA). Structural firefighters' protective clothing provides thermal protection but only limited chemical protection. (ERG, 2024)

Section 9. Physical and Chemical Properties

N-amyl formate appears as a clear colorless liquid with a plum-like odor. Less dense than water and insoluble in water. Vapors are heavier than air.

Clear colorless liquid with an odor like plums; [CAMEO]

colourless to pale yellow liquid with a fruit-like odour

130.00 to 131.00 °C. @ 760.00 mm Hg

128-130 °C

-73.5 °C

79 °F (NFPA, 2010)

miscible with alcohol, ether, most organic solvents

(in ethanol)

0.881-0.887

1.396-1.402

Chemical diffusion

Dielectric constant

Diffusion

Diffusive flux

Optical coefficient

Refractive index

Sound absorption

Sound propagation

Sound velocity

Surface tension

Thermal expansion coefficient

Vapor-liquid equilibrium

Viscosity

Flammable agents - 3rd degree

EU Flavoring substances

FLAVOR ENHANCER, FLAVORING AGENT OR ADJUVANT -> FDA Substance added to food

Fragrance Ingredient (Amyl formate) -> IFRA transparency List

Solvents -> Esters (<C12)

Section 10. Stability and Reactivity

Highly flammable. Insoluble in water.

Esters, Sulfate Esters, Phosphate Esters, Thiophosphate Esters, and Borate Esters

Highly Flammable

N-AMYL FORMATE is an ester. Esters react with acids to liberate heat along with alcohols and acids. Strong oxidizing acids may cause a vigorous reaction that is sufficiently exothermic to ignite the reaction products. Heat is also generated by the interaction of esters with caustic solutions. Flammable hydrogen is generated by mixing esters with alkali metals and hydrides.

Section 11. Toxicological Information

Neurotoxin - Acute solvent syndrome

Section 14. Transport Information

Flammable Liquid

Source: PubChem CID 12529 (NIH/NLM, public domain). Retrieved from PubChem, a public-domain chemistry database maintained by the U.S. National Library of Medicine. Last updated: 2026-08-02 09:11:07.
Disclaimer: This information is compiled for reference only and does not replace the manufacturer's official Safety Data Sheet. Always consult the supplier's SDS before handling any chemical.