English Safety Data Sheet Database 中文版 MSDS

Silver iodate

CAS No. 7783-97-3 | PubChem CID 165642
Section 1. Identification
Chemical NameSilver iodate CAS No.7783-97-3
Synonymssilveriodate Chinese Name碘酸银
Molecular FormulaAgIO3 Molecular Weight282.81
UN No.1479 Data SourcePubChem (NIH/NLM)
GHS Hazard Classification
Signal Word DANGER
Pictograms GHS03 · Oxidizer GHS07 · Irritant
Hazard Statements H272H315H319H335
Precautionary Statements P210P220P261P264P264+P265P271P280P302+P352P304+P340P305+P351+P338P319P321P332+P317P337+P317P362+P364P370+P378P403+P233P405P501

Section 2. Hazards Identification

H272 (100%): May intensify fire; oxidizer [Danger Oxidizing liquids; Oxidizing solids]

H315 (100%): Causes skin irritation [Warning Skin corrosion/irritation]

H319 (100%): Causes serious eye irritation [Warning Serious eye damage/eye irritation]

H335 (100%): May cause respiratory irritation [Warning Specific target organ toxicity, single exposure; Respiratory tract irritation]

P210, P220, P261, P264, P264+P265, P271, P280, P302+P352, P304+P340, P305+P351+P338, P319, P321, P332+P317, P337+P317, P362+P364, P370+P378, P403+P233, P405, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 64 reports by companies from 3 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website.

Section 4. First-Aid Measures

INHALATION: move to fresh air.

INGESTION: give large amount of water, induce vomiting.

EYES: flush with water for at least 15 min.

SKIN: flush with water, wash with soap and water. (USCG, 1999)

Section 5. Fire-Fighting Measures

Excerpt from ERG Guide 140 [Oxidizers]:

SMALL FIRE: Use water. Do not use dry chemicals or foams. CO2 or Halon® may provide limited control.

LARGE FIRE: Flood fire area with water from a distance. Do not move cargo or vehicle if cargo has been exposed to heat. If it can be done safely, move undamaged containers away from the area around the fire.

FIRE INVOLVING TANKS, RAIL TANK CARS OR HIGHWAY TANKS: For ammonium nitrate products: Do not fight cargo fire. Withdraw, evacuate and isolate area for at least 1600 meters (1 mile). Treat as an explosive (ERG Guide 112). Do not enter area for 24 hours or until expert advice has been provided. Fight fire from maximum distance or use unmanned master stream devices or monitor nozzles. Cool containers with flooding quantities of water until well after fire is out. ALWAYS stay away from tanks in direct contact with flames. For massive fire, use unmanned master stream devices or monitor nozzles; if this is impossible, withdraw from area and let fire burn. (ERG, 2024)

Section 6. Accidental Release Measures

Excerpt from ERG Guide 140 [Oxidizers]:

IMMEDIATE PRECAUTIONARY MEASURE: Isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids.

LARGE SPILL: Consider initial downwind evacuation for at least 100 meters (330 feet).

FIRE: If tank, rail tank car or highway tank is involved in a fire, ISOLATE for 800 meters (1/2 mile) in all directions; also, consider initial evacuation for 800 meters (1/2 mile) in all directions. If ammonium nitrate products are in a tank, rail car or truck and involved in a fire, ISOLATE for 1600 meters (1 mile) in all directions; also, initiate evacuation including emergency responders for 1600 meters (1 mile) in all directions. (ERG, 2024)

Section 7. Handling and Storage

Excerpt from ERG Guide 140 [Oxidizers]:

Keep combustibles (wood, paper, oil, etc.) away from spilled material. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Stop leak if you can do it without risk. Do not get water inside containers.

SMALL DRY SPILL: With clean shovel, place material into clean, dry container and cover loosely; move containers from spill area.

SMALL LIQUID SPILL: Use a non-combustible material like vermiculite or sand to soak up the product and place into a container for later disposal.

LARGE SPILL: Dike far ahead of liquid spill for later disposal. (ERG, 2024)

Section 8. Exposure Controls / Personal Protection

0.01 [mg/m3], inhalable fraction, as Ag (salts)[German Research Foundation (DFG)]

Dust mask; goggles or face shield; protective gloves (USCG, 1999)

Section 9. Physical and Chemical Properties

Silver iodate is an odorless white solid. Sinks in water. Interaction with Tellurium is violent.

White solid; Nearly insoluble in water (soluble in 1,875 parts water at 25 deg C); [Merck Index] White odorless powder; Isoluble in water (0.5 g/L at 25 deg C); [Alfa Aesar MSDS]

5.53 at 68 °F (USCG, 1999) - Denser than water; will sink

Metals -> Metals, Inorganic Compounds

Section 10. Stability and Reactivity

Explosive reaction between silver iodate and several different metal sulfides, hydrides etc., aided by the presence of water [Bretherick 1995, vol. 2, p. 207].

Oxidizing Agents, Strong

Strong Oxidizing Agent

SILVER IODATE reacts explosively with alkali metals [Bretherick 1979 p. 1028]. Intimate mixture of silver iodate with finely divided aluminum, arsenic, copper, carbon, phosphorus, sulfur, hydrides of alkali and alkaline earth-metals; sulfides of antimony, arsenic, copper or zinc; metal cyanides, thiocyanates; or impure magnesium dioxide may react explosively, either spontaneously (especially in the presence of moisture).

Section 11. Toxicological Information

Metallic silver is oxidized and may deposit in the tissues, causing arygria. The silver ion is known to inhibit glutathione peroxidase and NA+,K+-ATPase activity, disrupting selenium-catalyzed sulfhydryl oxidation-reduction reactions and intracellular ion concentrations, respectively. Silver nanoparticles are believed to disrupt the mitochondrial respiratory chain, causing oxidative stress, reduced ATP synthesis, and DNA damage. (L808, A243, A244, A245, A246)

No indication of carcinogenicity to humans (not listed by IARC).

Silver itself is not toxic to humans, but most silver salts are. In large doses, silver and compounds containing it can be absorbed into the circulatory system and become deposited in various body tissues, leading to argyria, which results in a blue-grayish pigmentation of the skin, eyes, and mucous membranes. Argyria is rare, and although, so far as known, this condition does not otherwise harm a person's health, it is disfiguring and usually permanent. Mild forms of argyria are sometimes mistaken for cyanosis. (L809)

Oral (L808) ; inhalation (L808) ; dermal (L808)

Exposure to high levels of silver for a long period of time may result in a condition called arygria, a blue-gray discoloration of the skin and other body tissues. Argyria is a permanent effect but does not appear to be harmful to health. Exposure to high levels of silver in the air has resulted in breathing problems, lung and throat irritation, and stomach pains. Skin contact with silver can cause mild allergic reactions such as rash, swelling, and inflammation in some people. (L808)

EYES: irrigate opened eyes for several minutes under running water. INGESTION: do not induce vomiting. Rinse mouth with water (never give anything by mouth to an unconscious person). Seek immediate medical advice. SKIN: should be treated immediately by rinsing the affected parts in cold running water for at least 15 minutes, followed by thorough washing with soap and water. If necessary, the person should shower and change contaminated clothing and shoes, and then must seek medical attention. INHALATION: supply fresh air. If required provide artificial respiration.

Section 14. Transport Information

Oxidizer

Source: PubChem CID 165642 (NIH/NLM, public domain). Retrieved from PubChem, a public-domain chemistry database maintained by the U.S. National Library of Medicine. Last updated: 2026-08-02 08:55:07.
Disclaimer: This information is compiled for reference only and does not replace the manufacturer's official Safety Data Sheet. Always consult the supplier's SDS before handling any chemical.