antimonytriiodide

H302 (100%): Harmful if swallowed [Warning Acute toxicity, oral]

H332 (100%): Harmful if inhaled [Warning Acute toxicity, inhalation]

H411 (100%): Toxic to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard]

P261, P264, P270, P271, P273, P301+P317, P304+P340, P317, P330, P391, and P501 (click each P-code to see the statement)

Aggregated GHS information provided per 44 reports by companies from 3 notifications to the ECHA C&L Inventory. Each notification may be associated with multiple companies.

Information may vary between notifications depending on impurities, additives, and other factors. The percentage value in parenthesis indicates the notified classification ratio from companies that provide hazard codes. Only hazard codes with percentage values above 10% are shown. For more detailed information, please visit ECHA C&L website.

H302: Harmful if swallowed [Warning Acute toxicity, oral]

H317: May cause an allergic skin reaction [Warning Sensitization, Skin]

H332: Harmful if inhaled [Warning Acute toxicity, inhalation]

H401: Toxic to aquatic life [Hazardous to the aquatic environment, acute hazard]

H411: Toxic to aquatic life with long lasting effects [Hazardous to the aquatic environment, long-term hazard]

P261, P264, P270, P271, P272, P273, P280, P301+P317, P302+P352, P304+P340, P317, P321, P330, P333+P317, P362+P364, P391, and P501 (click each P-code to see the statement)

Suitable extinguishing media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Advice for firefighters: Wear self-contained breathing apparatus for firefighting if necessary.

ACCIDENTAL RELEASE MEASURES; Personal precautions, protective equipment and emergency procedures: Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Avoid breathing dust. Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided. Methods and materials: for containment and cleaning up: Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal.

SRP: Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in air, soil or water; effects on animal, aquatic and plant life; and conformance with environmental and public health regulations. If it is possible or reasonable use an alternative chemical product with less inherent propensity for occupational harm/injury/toxicity or environmental contamination.

Product: Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material. Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. Contaminated packaging: Dispose of as unused product.

Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Provide appropriate exhaust ventilation at places where dust is formed.

ACCIDENTAL RELEASE MEASURES; Personal precautions, protective equipment and emergency procedures: Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Avoid breathing dust. Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.

Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.

Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.

For more Preventive Measures (Complete) data for Antimony triiodide (8 total), please visit the HSDB record page.

Keep container tightly closed in a dry and well-ventilated place. Air sensitive. Storage class (TRGS 510): 13: Non Combustible Solids

0.5 [mg/m3], as Sb

50.0 [mg/m3]

50 mg/cu m, as Sb /Antimony/

0.5 [mg/m3], as Sb (0.01 ppm, inhalable fraction and vapor (iodides))

8 hr Time Weighted Avg (TWA): 0.5 mg/cu m. /Antimony and compounds, as Sb/

Peak Exposure Recommendation: Transient increases in workers' exposure levels may exceed 3 times the value of the TLV-TWA level for no more than 15 minutes at a time, on no more than 4 occasions spaced 1 hour apart during a workday, and under no circumstances should they exceed 5 times the value of the TLV-TWA level. In addition, the 8-hour TWA is not to be exceeded for an 8-hour work period. /Antimony and compounds, as Sb/

Eye/face protection: Face shield and safety glasses. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Skin protection: Handle with gloves.

Body Protection: Complete suit protecting against chemicals. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.

Respiratory protection: For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator. For higher level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

For more Personal Protective Equipment (PPE) (Complete) data for Antimony triiodide (12 total), please visit the HSDB record page.

Ruby-red solid; Yellowish-green modifications also exist; [Merck Index] Red crystalline solid; [MSDSonline]

Ruby-red, trigonal crystals (yellowish-green modifications have been observed)

Red rhombic crystals

Red-to-yellow crystals

Reacts with water

Decomposes in water with precipitation of oxyiodide

Soluble in ethanol, acetone; insoluble in carbon tetrachloride

Souble in alcohol; acetone; carbon disulfide, hydrochloric acid, solution of potassium iodide; insoluble in carbon tetrachloride

4.92 g/cu cm at 25 °C

Density: 4.921 at 17 °C/4 °C

Density: 4.768

1 mm Hg at163.6 °C

Stable under recommended storage conditions.

Hazardous decomposition products formed under fire conditions. - Hydrogen iodide, Antimony oxide

Decomposed by water and air to SbOI (antimony oxyiodide).

When heated to decomposition it emits highly toxic Sb fumes and /hydrogen iodide/.

68.6 kJ/mol at 401 °C (boiling point)

Volatile at high temperatures

Critical temperature: 1102 °C

Dipole moment: 1.58

Heat capacity: 96 J/mol.k (solid); 144 J/mol.K (liquid); Entropy: 216 J/mol.K at 298 °C

For more Other Experimental Properties (Complete) data for Antimony triiodide (8 total), please visit the HSDB record page.

phonon wavenumber

dielectric constant

crystal structure

fusion temperature

dielectricity

enthalpy

effective mass

Gibbs energy

positional coordinate

temperature-composition section

space group

molecular structure

phase diagram

unit cell parameter

melting temperature

heat capacity

electronic structure

Schoenflies notation

A mixture of potassium and ... the metallic halide ... antimony triiodide ... produces a strong explosion on impact.

Incompatible with sodium, potassium.

... Antimony triiodide ... readily hydrolyzes, forms complex halide ions and forms a wide variety of adducts with ethers, aldehydes, mercaptans ... .

Acids, Water, Strong bases, Sodium/sodium oxides, Potassium

Strong oxidizers, acids, halogenated acids [Note: Stibine is formed when antimony is exposed to nascent (freshly formed) hydrogen.] /Antimony/

IDENTIFICATION AND USE: Antimony triiodide is a solid. It is used as laboratory chemical and in the synthesis of substances. HUMAN STUDIES: Antimony halides are hydrolyzed to oxides which are not absorbed but cause severe irritation and caustic action on alimentary mucosa. Antimony halides produce irritant effects on the mucous membranes of the eyes, nose, mouth, throat, and upper respiratory tract. ANIMAL STUDIES: Chronic inhalation of subtoxic doses of antimony salts causes interstitial pneumonitis, intraalveolar lipoid deposits, and liver and cardiac damage.

Occupational hepatotoxin - Secondary hepatotoxins: the potential for toxic effect in the occupational setting is based on cases of poisoning by human ingestion or animal experimentation.

Nephrotoxin - The chemical is potentially toxic to the kidneys in the occupational setting.

Dermatotoxin - Skin burns.

Toxic Pneumonitis - Inflammation of the lungs induced by inhalation of metal fumes or toxic gases and vapors.

/SRP:/ Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR if necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on the left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. /Poisons A and B/

/SRP:/ Basic treatment: Establish a patent airway (oropharyngeal or nasopharyngeal airway, if needed). Suction if necessary. Watch for signs of respiratory insufficiency and assist ventilations if needed. Administer oxygen by nonrebreather mask at 10 to 15 L/min. Monitor for pulmonary edema and treat if necessary ... . Monitor for shock and treat if necessary ... . Anticipate seizures and treat if necessary ... . For eye contamination, flush eyes immediately with water. Irrigate each eye continuously with 0.9% saline (NS) during transport ... . Do not use emetics. For ingestion, rinse mouth and administer 5 mL/kg up to 200 mL of water for dilution if the patient can swallow, has a strong gag reflex, and does not drool ... . Cover skin burns with dry sterile dressings after decontamination ... . /Poisons A and B/

/SRP:/ Advanced treatment: Consider orotracheal or nasotracheal intubation for airway control in the patient who is unconscious, has severe pulmonary edema, or is in severe respiratory distress. Positive-pressure ventilation techniques with a bag valve mask device may be beneficial. Consider drug therapy for pulmonary edema ... . Consider administering a beta agonist such as albuterol for severe bronchospasm ... . Monitor cardiac rhythm and treat arrhythmias as necessary ... . Start IV administration of D5W TKO /SRP: "To keep open", minimal flow rate/. Use 0.9% saline (NS) or lactated Ringer's (LR) if signs of hypovolemia are present. For hypotension with signs of hypovolemia, administer fluid cautiously. Watch for signs of fluid overload ... . Treat seizures with diazepam or lorazepam ... . Use proparacaine hydrochloride to assist eye irrigation ... . /Poisons A and B/

/SRP:/ Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand-valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR as necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. /Iodine and related compounds/

For more Antidote and Emergency Treatment (Complete) data for Antimony triiodide (6 total), please visit the HSDB record page.

SRP: Recycle any unused portion of the material for its approved use or return it to the manufacturer or supplier. Ultimate disposal of the chemical must consider: the material's impact on air quality; potential migration in air, soil or water; effects on animal, aquatic and plant life; and conformance with environmental and public health regulations. If it is possible or reasonable use an alternative chemical product with less inherent propensity for occupational harm/injury/toxicity or environmental contamination.

Product: Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material. Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. Contaminated packaging: Dispose of as unused product.

/GUIDE 157 SUBSTANCES - TOXIC and/or CORROSIVE (Non-Combustible/Water-Sensitive)/ Fire or Explosion: Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes. For UN1796, UN1826, UN2031 at high concentrations and for UN2032, these may act as oxidizers, also consult GUIDE 140. Vapors may accumulate in confined areas (basement, tanks, hopper/tank cars, etc.). Substance may react with water (some violently), releasing corrosive and/or toxic gases and runoff. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated or if contaminated with water. /Antimony compound, inorganic, solid, n.o.s.; Antimony compound, inorganic, liquid, n.o.s./

/GUIDE 157 SUBSTANCES - TOXIC and/or CORROSIVE (Non-Combustible/Water-Sensitive)/ Health: TOXIC; inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns or death. Reaction with water or moist air may release toxic, corrosive or flammable gases. Reaction with water may generate much heat that will increase the concentration of fumes in the air. Fire will produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution. /Antimony compound, inorganic, solid, n.o.s.; Antimony compound, inorganic, liquid, n.o.s./

/GUIDE 157 SUBSTANCES - TOXIC and/or CORROSIVE (Non-Combustible/Water-Sensitive)/ Public Safety: CALL Emergency Response Telephone Number on Shipping Paper first. If Shipping Paper not available or no answer, refer to appropriate telephone number listed on the inside back cover. As an immediate precautionary measure, isolate spill or leak area in all directions for at least 50 meters (150 feet) for liquids and at least 25 meters (75 feet) for solids. Keep unauthorized personnel away. Stay upwind, uphill and/or upstream. Ventilate enclosed areas. /Antimony compound, inorganic, solid, n.o.s.; Antimony compound, inorganic, liquid, n.o.s./

/GUIDE 157 SUBSTANCES - TOXIC and/or CORROSIVE (Non-Combustible/Water-Sensitive)/ Protective Clothing: Wear positive pressure self-contained breathing apparatus (SCBA). Wear chemical protective clothing that is specifically recommended by the manufacturer. It may provide little or no thermal protection. Structural firefighters' protective clothing provides limited protection in fire situations ONLY; it is not effective in spill situations where direct contact with the substance is possible. /Antimony compound, inorganic, solid, n.o.s.; Antimony compound, inorganic, liquid, n.o.s./

For more DOT Emergency Guidelines (Complete) data for Antimony triiodide (8 total), please visit the HSDB record page.

UN 3141; Antimony compound, inorganic, liquid, not otherwise specified

UN 1549; Antimony compound, inorganic, solid, not otherwise specified

IMO 6.1; Antimony compound, inorganic, solid, not otherwise specified; Antimony compound, inorganic, liquid, not otherwise specified

No person may /transport,/ offer or accept a hazardous material for transportation in commerce unless that person is registered in conformance ... and the hazardous material is properly classed, described, packaged, marked, labeled, and in condition for shipment as required or authorized by ... /the hazardous materials regulations (49 CFR 171-177)./

The International Air Transport Association (IATA) Dangerous Goods Regulations are published by the IATA Dangerous Goods Board pursuant to IATA Resolutions 618 and 619 and constitute a manual of industry carrier regulations to be followed by all IATA Member airlines when transporting hazardous materials. Antimony compound, inorganic, solid, not otherwise specified and antimony compound, inorganic, liquid, not otherwise specified are included on the dangerous goods list. /Antimony compound, inorganic, solid, not otherwise specified; Antimony compound, inorganic, liquid, not otherwise specified/

The International Maritime Dangerous Goods Code lays down basic principles for transporting hazardous chemicals. Detailed recommendations for individual substances and a number of recommendations for good practice are included in the classes dealing with such substances. A general index of technical names has also been compiled. This index should always be consulted when attempting to locate the appropriate procedures to be used when shipping any substance or article. Antimony compound, inorganic, solid, not otherwise specified and antimony compound, inorganic, liquid, not otherwise specified are included on the dangerous goods list. /Antimony compound, inorganic, solid, not otherwise specified; Antimony compound, inorganic, liquid, not otherwise specified/